ENQUIRE NOW

[contact-form-7 id="13595" title="Contact form 1"]

KNOW THE TIPS TO INSTALL METAL ROOFING

metal install

Metal roofing is gaining popularity day by day because of its beauty and tough. Apart from this, metal roofing sheets help you bring your energy costs down. Metal roofing comes into tons of styles, quality, and colors. Based on your aesthetic desire, you can go for the right one. If you need help with the installation, you should read the following tips.

STEPS TO PREPARE YOUR ROOF

GET MEASUREMENT:

First of all, you should upgrade your roofing sheets. For this, you should get the measurement of your roof do you can order the needed material. For an exact measurement, it’s a good idea to start taking the measurements from the bottom first. Don’t make hurt while climbing the roof.

GET THE REQUIRED MATERIAL:

Once you receive the measurement, you should place an order with a good provider. Only choose quality material. Things you will need to contain drill bits, a drill, a staple gun, a metal shear. Other things that you will need to contain roofing nails, self-drilling, wood screws, and metal screws.

GET THE WORKSITE READY:

To make the installation smooth, you should get the work area arranged. For this, you should get a big trash bin, a spot for tools and a strong ladder. When using electric tools, confirm that the cords are not in your way. The needed tools and other stuff should be placed in an area where you can approach them without any problem.

TAKE OFF THE OLD ROOFING:

While you can install the new roofing on shingles, we recommend that you remove the entire old stuff. Confirm you keep a slow pace so you don’t want to rip-up the old roofing all of a sudden.

THE INSTALLATION PROCESS

Follow the steps below to complete the installation.

THE EDGING:

Eave flashing or edging consists of metal strips that you can use for wrapping the roof perimeter. Confirm the edging will cover up the gutter edge.

METAL PANELS:

Ideally, you should begin from the longest peak to the edging point of your roof. All you have to do is get the first metal sheet and put it in a way that will overhang the eave. Apart from this, the panel should be perpendicularly aligned to the edge.

THE FLASHING:

The flashing is the metal trim that shows like the edging.

FINISHING:

Confirm the metal has covered the whole roof. All the edges should be smooth and there should be no unsteady parts.

Have you been looking for quality metal roofing in Chennai? If so, we suggest crayon roofing and structure is the leading roofing dealer who satisfies their customer needs a lot. For more details visit JSW color coated sheets.

 

Leave a Comment